8-BIT SHIFT REGISTERS
The SN54L/74LS166 is an 8-Bit Shift Register. Designed with all inputs
buffered, the drive requirements are lowered to one 54/74LS standard load.
By utilizing input clamping diodes, switching transients are minimized and
system design simplified.
The LS166 is a parallel-in or serial-in, serial-out shift register and has a
complexity of 77 equivalent gates with gated clock inputs and an overriding
clear input. The shift/load input establishes the parallel-in or serial-in mode.
When high, this input enables the serial data input and couples the eight
flip-flops for serial shifting with each clock pulse. Synchronous loading occurs
on the next clock pulse when this is low and the parallel data inputs are
enabled. Serial data flow is inhibited during parallel loading. Clocking is done
on the low-to-high level edge of the clock pulse via a two input positive NOR
gate, which permits one input to be used as a clock enable or clock inhibit
function. Clocking is inhibited when either of the clock inputs are held high,
holding either input low enables the other clock input. This will allow the
system clock to be free running and the register stopped on command with
the other clock input. A change from low-to-high on the clock inhibit input
should only be done when the clock input is high. A buffered direct clear input
overrides all other inputs, including the clock, and sets all flip-flops to zero.
• Synchronous Load
• Direct Overriding Clear
• Parallel to Serial Conversion
데이터시트 보기
* 본 제품은 경우에 따라 호환되는 타사 제품으로 변경될 수 있음을 알려 드립니다.
주문시 참고 하세요~~
|
