|
LM1283N (DIP)
최소주문수량 : 10개 |
|
|
| 제조회사 : ANY |
| 판매가격 : 2,850원 |
|
|
|
| 적립금액 : 0원 |
|
|
|
|
|
| ★★★★★ |
| 신속하고 정확한 배송을 약속드립니다 |
|
|
|
|
|
140 MHz RGB Video Amplifier System with On Screen
Display (OSD)
General Description
The LM1283 is a full feature video amplifier with OSD inputs,
all within a 28-pin package. This part is intended for use in
monitors with resolutions up to 1280 x 1024. The video section
of the LM1283 features three matched video amplifiers
with blanking. All of the video amplifier adjustments feature
high input impedance 0V to 4V DC controls, providing easy
interfacing to bus controlled alignment systems. The OSD
section features three TTL inputs and a DC contrast control.
The switching between the OSD and video section is controlled
by a single TTL input. Although the OSD signals are
TTL inputs, these signals are internally processed to match
the OSD logic low level to the video black level. When adjusting
the drive controls for color balance of the video signal,
the color balance of the OSD display will track these
color adjustments. The LM1283 also features an internal
spot killer circuit to protect the CRT when the monitor is
turned off. For applications without OSD insertion please refer
to the LM1205 or LM1208 data sheets.
Features
n Three wideband video amplifiers 140 MHz @ −3 dB
(4 VPP output)
n TTL OSD inputs, 50 MHz bandwidth
n On chip blanking, outputs under 0.1 V when blanked
n Video/OSD switch speed of 7 ns
n Independent drive control for each channel for color
balance
n 0V to 4V, high impedance DC contrast control with over
40 dB range
n 0V to 4V, high impedance DC drive control (0 dB to
−12 dB range)
n 0V to 4V, high impedance DC OSD contrast control with
over 40 dB range
n Capable of 6.5 VPP output swing (slight reduction in
bandwidth)
n Output stage directly drives most hybrid or discrete CRT
drivers
데이터시트 보기
* 본 제품은 경우에 따라 호환되는 타사 제품으로 변경될 수 있음을 알려 드립니다.
주문시 참고 하세요~~
|
* 제품 사용 전 반드시 테스트 후 사용하시기 바랍니다.
* 첨부된 데이터시트는 참고용으로만 사용하시기 바랍니다. |
 |
|
