|
LM1207N (DIP)
최소주문수량 : 10개 |
|
|
| 제조회사 : ANY |
| 판매가격 : 2,450원 |
|
|
|
| 적립금액 : 0원 |
|
|
|
|
|
| ★★★★★ |
| 신속하고 정확한 배송을 약속드립니다 |
|
|
|
|
|
130 MHz/85 MHz RGB Video Amplifier System with
Blanking
General Description
The LM1205/LM1207 is a very high frequency video amplifier
system intended for use in high resolution RGB monitor
applications. In addition to the three matched video amplifiers,
the LM1205/LM1207 contains three gated single ended
input black level clamp comparators for brightness control,
three matched DC controlled attenuators for contrast
control, and three DC controlled sub-contrast attenuators
providing gain trim capability for white balance. All DC control
inputs offer high input impedance and an operation
range from 0V to 4V for easy interface to bus controlled
alignment systems. The LM1205/LM1207 also contains a
blanking circuit which clamps the video output voltage during
blanking to within 0.1V above ground. This feature provides
blanking capability at the cathodes of the CRT. A spot
killer is provided for CRT phosphor protection during powerdown.
Features
Y Three wideband video amplifiers 130 MHz (LM1205) @
b3 dB (4 VPP output)
Y Matched (g0.1 dB or 1.2%) attenuators for contrast
control
Y Three externally gated single ended input comparators
for cutoff and brightness control
Y 0V to 4V, high input impedance DC contrast control
(l40 dB range)
Y 0V to 4V, high input impedance DC drive control for
each video amplifier (b6 dB to 0 dB range)
Y Spot killer, blanks output when VCC k 10.6V
Y Capable of 7 VPP output swing (slight reduction in
bandwidth)
Y Output stage blanking
Y Output stage directly drives most hybrid or discrete
CRT drivers
데이터시트 보기
* 본 제품은 경우에 따라 호환되는 타사 제품으로 변경될 수 있음을 알려 드립니다.
주문시 참고 하세요~~
|
* 제품 사용 전 반드시 테스트 후 사용하시기 바랍니다.
* 첨부된 데이터시트는 참고용으로만 사용하시기 바랍니다. |
 |
|
