|
LM2917N (DIP)
최소주문수량 : 20개 |
|
|
| 제조회사 : NSC |
| 판매가격 : 1,790원 |
|
|
|
| 적립금액 : 0원 |
|
|
|
|
|
| ★★★★★ |
| 신속하고 정확한 배송을 약속드립니다 |
|
|
|
|
|
Frequency to Voltage Converter
General Description
The LM2907, LM2917 series are monolithic frequency to
voltage converters with a high gain op amp/comparator designed
to operate a relay, lamp, or other load when the input
frequency reaches or exceeds a selected rate. The tachometer
uses a charge pump technique and offers frequency
doubling for low ripple, full input protection in two versions
(LM2907-8, LM2917-8) and its output swings to ground for a
zero frequency input.
The op amp/comparator is fully compatible with the tachometer
and has a floating transistor as its output. This feature
allows either a ground or supply referred load of up to 50 mA.
The collector may be taken above VCC up to a maximum VCE
of 28V.
The two basic configurations offered include an 8-pin device
with a ground referenced tachometer input and an internal
connection between the tachometer output and the op amp
non-inverting input. This version is well suited for single
speed or frequency switching or fully buffered frequency to
voltage conversion applications.
The more versatile configurations provide differential tachometer
input and uncommitted op amp inputs. With this
version the tachometer input may be floated and the op amp
becomes suitable for active filter conditioning of the tachometer
output.
Both of these configurations are available with an active
shunt regulator connected across the power leads. The
regulator clamps the supply such that stable frequency to
voltage and frequency to current operations are possible
with any supply voltage and a suitable resistor.
Advantages
n Output swings to ground for zero frequency input
n Easy to use; VOUT = fIN x VCC x R1 x C1
n Only one RC network provides frequency doubling
n Zener regulator on chip allows accurate and stable
frequency to voltage or current conversion (LM2917)
Features
n Ground referenced tachometer input interfaces directly
with variable reluctance magnetic pickups
n Op amp/comparator has floating transistor output
n 50 mA sink or source to operate relays, solenoids,
meters, or LEDs
n Frequency doubling for low ripple
n Tachometer has built-in hysteresis with either differential
input or ground referenced input
n Built-in zener on LM2917
n ±0.3% linearity typical
n Ground referenced tachometer is fully protected from
damage due to swings above VCC and below ground
데이터시트 보기
* 본 제품은 경우에 따라 호환되는 타사 제품으로 변경될 수 있음을 알려 드립니다.
주문시 참고 하세요~~
|
* 제품 사용 전 반드시 테스트 후 사용하시기 바랍니다.
* 첨부된 데이터시트는 참고용으로만 사용하시기 바랍니다. |
 |
|
